Pc Lap Counter

Logiciel de comptage
 
HomeHome  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  

Share | 
 

 Error 1001 and 1004 while connecting

View previous topic View next topic Go down 
AuthorMessage
boess



Number of posts : 1
Registration date : 2012-12-09

PostSubject: Error 1001 and 1004 while connecting   9/12/2012, 20:25

Hi,

I was just trying to connect PC Lap Counter to my ninco powerbase. The powerbase should be version 1.08. I bought the following cable to connect --> http://dx.com/p/jy-mcu-usb-serial-port-adapter-download-line-arduino-104322
I took a ps2 cable from an old mouse and connected pin 1 to the rxd and pin 5 to the ground of the usb adapter.

When I try to connect I got several 1004 and 1001 errors. In debug I see the following information (2 crossings of the same car):
67 7A 7A 6A 3A 75 7A 7A 0A 3A 35 5A 2A 7A 3A 3A 3A 7A
7A 7A 5A 2A 5A 2A 77 00 66 7A 7A 0A 3A 65
4A 4E 7D 65 4E 7D 65 4E 3E 65 4E 7D 65 4E 7D 65 4E 1F
79 4E 1F 79 4A 7F 00 66 7A 7A 0A 3A 45 4A
4E 7D 65 4E 7D 65 4E 3E 65 4E 7D 65 4E 7D 65 4E 1F 79
4E 1F 79 4A 7F 00 67 7A 7A 6A 3A 75 7A 7A
7A 74 35 5A 2A 2A 7A 04 3A 75 7A 7A 5A 2A 5A 2A 7B 00
66 7A 7A 7A 3A 55 4A 4E 1F 79 4E 1F 79 4E
1F 79 27 1F 79 4E 1F 79 4E 1F 79 27 1F 79 4A 7F 00 66
7A 7A 7A 74 55 4A 4E 7D 65 4E 3E 65 4E 7D
65 4E 7D 65 4E 1F 79 4E 1F 79 4E 1F 79 64 7F 00

If I read correctly I should not have to change any port settings because the software creates the COM connection himself. Is the adapter I use to connect wrong or is my powerbase not a 1.08? (it was sold to me as 1.08) Any help is appreciated.
Back to top Go down
View user profile
guy

avatar

Number of posts : 2046
Localisation : Belgique
Registration date : 2006-01-25

PostSubject: Re: Error 1001 and 1004 while connecting   9/12/2012, 23:48

For sure your cable is not working Exclamation , the only cable which is working 100% is the cable from Rich.G ( more information here: http://www.pclapcounter.be/ninco_digital_1_08.html )

_________________
www.pclapcounter.be
www.pclapcounter.com
pclapcounter video channel
Back to top Go down
View user profile http://www.pclapcounter.be
 
Error 1001 and 1004 while connecting
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Problem after connecting the battery in reverse!
» Error Code P1870
» Lots of vertical error in my iron sight hold
» Possible Solution for the 'Failed to retrieve' error
» Error Code 14

Permissions in this forum:You cannot reply to topics in this forum
Pc Lap Counter :: Hardware :: Ninco Digital-
Jump to: