Pc Lap Counter

Logiciel de comptage
 
HomeHome  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  

Share | 
 

 PCLC for event "new race"

View previous topic View next topic Go down 
AuthorMessage
zibi1



Number of posts : 13
Registration date : 2014-08-14

PostSubject: PCLC for event "new race"   15/1/2015, 22:08

I ask of "new race" with quick start.

When I use new race button PCLC show "race seting" focus is on number of laps. better it'll on "OK" button.

Is it possible to do it by arduino "button"?
But I detect that "[BT01]" don't work (remote "start" command)
Back to top Go down
View user profile
guy

avatar

Number of posts : 2047
Localisation : Belgique
Registration date : 2006-01-25

PostSubject: Re: PCLC for event "new race"   17/1/2015, 21:51

zibi1 wrote:

But I detect that  "[BT01]" don't work (remote "start" command)
BT01 work, BT01 is to start the race and not setup the race !

_________________
www.pclapcounter.be
www.pclapcounter.com
pclapcounter video channel
Back to top Go down
View user profile http://www.pclapcounter.be
zibi1



Number of posts : 13
Registration date : 2014-08-14

PostSubject: Re: PCLC for event "new race"   17/1/2015, 22:55

I describe what I do, step by step:
1- run PCLC
focus is on "SSD Adwanced power base ..." (and would be right there on the main window)
2- fous change on main windows of PCLC
3- I press CTR + n (new race)
4- I make setup (it would be cool if fosus was "ok" they rarely change the settings, and PCLC remembers the last setting, difficult for me is to use mouse)
5- I choose the "ok"
6- I press ALT + 1 (at this location [BT01] does not work, on / off function does not work also )
race starts (then pause and restart function and on / off while the start is not required)
....
7- end of the race
8- I am able to start the race or a new race (resume and pause are inactive) but BT01 does not work, I have to manually press ALT + F1

And I do it several times over and over again.
Back to top Go down
View user profile
guy

avatar

Number of posts : 2047
Localisation : Belgique
Registration date : 2006-01-25

PostSubject: Re: PCLC for event "new race"   18/1/2015, 00:52

I made a test by using com port toolkit and at point 6 BT01 work , so i suggest you check your arduino sketch

_________________
www.pclapcounter.be
www.pclapcounter.com
pclapcounter video channel
Back to top Go down
View user profile http://www.pclapcounter.be
zibi1



Number of posts : 13
Registration date : 2014-08-14

PostSubject: Re: PCLC for event "new race"   18/1/2015, 11:11

Hello GUJ
PT01 works!
I'm sorry for the confusion
I made a mistake in that first Arduino sketch waiting for a signal from the PCLC and later only allowed to send commands
Thank you for your help.
I also request assistance with my other problems. Probably somewhere I make a similar mistake.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: PCLC for event "new race"   

Back to top Go down
 
PCLC for event "new race"
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» IRONMAN WISCONSIN RACE REPORT
» Intersted to ride shortly on Dijon race track mid May ?
» Windrock Wide Open Race 2-5-2011 Coal Creek Event Area
» Brimstone White Knuckle Event Memorial Day weekend
» TRD AE86 N2 Race Car Project build log

Permissions in this forum:You cannot reply to topics in this forum
Pc Lap Counter :: Demand-
Jump to: