Pc Lap Counter

Logiciel de comptage
HomeHome  FAQFAQ  SearchSearch  RegisterRegister  MemberlistMemberlist  UsergroupsUsergroups  Log in  

Share | 

 Starting lights with Trackmate IF

Go down 

Number of posts : 16
Registration date : 2010-06-22

PostSubject: Starting lights with Trackmate IF   22/9/2010, 09:37

Hi Guy. I know that the starting lights cannot be used with the Trackmate board, but if I had a second parallel port, and configured the lights to run off of LPT2, would this allow the start lights in PCLapcounter to work (and have Trackmate board do the lap counting and power!)


Back to top Go down
View user profile


Number of posts : 2130
Localisation : Belgique
Registration date : 2006-01-25

PostSubject: Re: Starting lights with Trackmate IF   22/9/2010, 17:47

you can't use LPT2 because Pc Lap Counter support only LPT1.
For starting lights you can use LPT1 or Phidget interface (you can connect up to 4 phidget interface).
The best solution is to use a Phidget interface 0/16/16, with a 0/16/16 you will have 16 digital output and therefore you can use it for starting lights and other lights (http://www.pclapcounter.be/other_light.html).
The easy solution is to use Phidget interface 0/0/4 or 0/0/8 because they have relay on board (really plug and play solution).

pclapcounter video channel
Back to top Go down
View user profile http://www.pclapcounter.be
Starting lights with Trackmate IF
Back to top 
Page 1 of 1
 Similar topics
» Im having trouble starting my 14 hp I/C OHV motor.
» HID lights
» Factory Steering rack & Tail lights
» Small Medium Room Available Starting from 1st June 2011
» ddm tuning hid lights any good ?

Permissions in this forum:You cannot reply to topics in this forum
Pc Lap Counter :: Hardware :: Trackmate interface-
Jump to: